If your house is built on uneven soil, you are probably experiencing some of the most frustrating soil problems imaginable. The soil pressure can cause cracks in foundations, leaky gutters, and even complete subsidence of the foundation. Fortunately, you can fix this problem before it gets out of control. An uneven soil profile under your concrete may be due to climate conditions or to poor soil management practices. But whatever the cause, you should take action now.
Uneven soil beneath the concrete (caused by frost, rain, or freeze/thaw cycles) often causes cracks in concrete. Unfortunately, repairing cracked concrete only improves its look, but also shields it from further damage. Closing the crack usually prevents further damage from occurring and thus allows the soil to slowly fill back in. However, if there is still no improvement, you may need to excavate the affected area and install underlayment before sealing it. An underlayment will help keep the soil wedged between the concrete and the substrate, which should prevent cracks from further developing.
Before excavating and installing an underlayment, however, it’s important to determine whether your soil is actually giving you problems. Do you see tiny cracks in your soil? Are there areas where you have to walk on your hands to push your car into the garage? Or perhaps you notice that your car doesn’t skid or that it isn’t as slippery as it used to be when you drove over the same surface with your car last summer? Uneven soil can cause many problems for your concrete, but if you can fix the problem now, you can save yourself a lot of hassle later. You should contact Concrete Contractors Pittsburgh PA to find out the cause of your soil issues.
If the problem is uneven soil, then you should take steps to repair it. The best way to repair uneven soil is to improve its shape by adding compacted soil to it. To do this, remove compacted soil and add fine-grained gravel to the area. This will help the area to fill out more efficiently and make it run smoother.
If the problem lies in the actual concrete, you will need to remove and replace the area beneath the surface with new, reinforced concrete. If the cracks are shallow ones, you should pour a baseboard mixture into the hole and let it sit for several days. Then, use concrete pot pipes to connect the newly formed concrete surface to the existing pipes below. While this will make the area look new, you should not forget about waterproofing the new work.
Once the area has been waterproofed, you should make sure that the waterproofing membrane is placed between the concrete and the ground. This will help keep the water away from the concrete while it sets. Another thing that you can do to make sure that your concrete is set properly is to put down a layer of crushed stone or other natural materials. You should also avoid filling up the area with heavy materials as this may actually cause the cracks to widen.
To maintain the beauty of your work, you should make sure that you keep the area well-maintained. Make sure that there are no bare areas where water can seep through. You should also check if any areas might become loose soon. For instance, if the concrete starts to weaken, then you should fill up the gap or fix it by adding supports. If you live in an area where you face seasonal temperature changes, then you should install your concrete over an area that is slightly higher than usual. This will prevent the concrete from cracking under normal conditions.
These are just some of the many ways that you can solve the problem of uneven soil. Of course, you can always get a professional to help you in your endeavor. With this kind of expertise, you can be sure that you will get the best results possible. After all, they are the experts in the field of construction and remodeling.